A cafe in Fremantle, a machinery yard outside Dubbo and a cool-store in Launceston all want the same outcome: to know what happened on site when nobody was there. The route to that outcome differs a great deal. This page sets out the common planning questions, then sends you to the guide for your state or city.
Start with the site, not the brand
Most of the useful decisions happen before anyone mentions cameras. Write down what you are protecting, when the site is empty, who is allowed in and how far apart your buildings are. A tight shopfront needs a handful of well-placed views. A yard of several hectares needs a different approach, with cabling, power and lighting dominating the budget. The camera count tool and the guide on how many cameras you need turn those answers into a first estimate, and cameras for Australian business sites covers the typical building types.
How conditions change across the continent
Climate and geography change the hardware long before they change the software.
- Tropical north and the Queensland coast: humidity, lightning, salt air and cyclone-prone coastline. See Queensland and the Northern Territory.
- Hot dry interior and the west: heat on recorders, red dust and very long distances. See Western Australia and South Australia.
- Cool, damp south: frost, condensation, moss and heritage buildings. See Tasmania and Victoria.
- Dense metropolitan estates: shared laneways, tenants, landlords and workplace rules. See New South Wales and the ACT.
Bushfire smoke and embers are a seasonal factor across much of the south, and storms with lightning matter almost everywhere. Neither changes the principle: sealed enclosures, shaded and ventilated recorders, surge protection and a maintenance routine.
Distance, power and connectivity
Business sites are rarely small. A standard network cable has a limited run, so anything beyond a building needs fibre, a wireless link or a standalone post with its own power. Poor mobile coverage and slow upload are common outside capital cities, and upload speed is usually the number that limits remote viewing. The practical answer is to record on site and send only alerts and short clips. The network and bandwidth guide shows how to check the figures, and PoE versus Wi-Fi explains where each belongs. A small UPS keeps the recorder and switch running through short outages, and a 4G backup path helps where the fixed line is unreliable.
What AI alerts add
Basic motion detection reacts to anything that changes in the picture: shadows, insects, rain, headlights. AI analytics on compatible systems classify what moved, so a person or vehicle in a defined zone after hours can raise an alert. Which features you get depends on the camera and recorder, and entry-level equipment may offer motion detection only. AI also does not guarantee detection; it flags events, and a person decides what they mean. Read AI CCTV versus motion detection and the after-hours intrusion alerts guide for the detail. Sites with a stock problem may also want reduce stock loss with cameras, and gates that need vehicle identification should read about licence plate cameras.
Storage and retention
Retention should match how quickly you would notice a problem. A shop that opens daily may need a week. A seasonal farm or a closed workshop may need a month or more. Use the storage tool and the CCTV storage calculator guide to size drives, and think about NVR versus cloud camera systems when deciding where footage lives. How long to keep footage is covered in how long to keep CCTV footage.
Surveillance law differs by state
Each state and territory has its own rules. For example, New South Wales has the Surveillance Devices Act 2007 and the Workplace Surveillance Act 2005, Victoria the Surveillance Devices Act 1999, Queensland the Invasion of Privacy Act 1971, Western Australia the Surveillance Devices Act 1998, South Australia the Surveillance Devices Act 2016, Tasmania the Listening Devices Act 1991, the ACT the Listening Devices Act 1992 and the Workplace Privacy Act 2011, and the Northern Territory the Surveillance Devices Act 2007. This is general information, not legal advice, and you should check current legislation for your own situation. Common themes include stricter treatment of audio than video, the importance of signage and telling staff, no cameras in toilets or change rooms, and keeping neighbours' private spaces out of view. The business CCTV law guide expands on these.
What to ask any installer
- Which parts of my site can the system actually cover, and what will it miss?
- Which of my existing cameras and recorder can be reused?
- How will remote access be set up securely, without port forwarding?
- Who maintains it, and what happens when a camera fails?
- How is footage stored, for how long, and who can access it?
- Can you show me your licence and insurance details?
Use choosing a CCTV installer in Australia as a checklist, and compare the answers from each quote.
How the service works with local installers
Our own team installs in South East Queensland. Elsewhere, a local installer does the cabling and mounting while we set up, connect and support the AI alert layer remotely. Coverage and scheduling are confirmed when we quote. For more on the service itself, see how AI analytics works on aicamerasystems.com.au, or browse our city guides and state guides.